AMMO's new U-RUST range is a new formula designed to create rust effects on your models. It is not regular paint that simulates a rust finish - but an actual oxidation process. These effects are easily achieved with U-RUST. AMMO has managed to adapt an ordinary chemical reaction to our scale models.

Directions

1. Base coat your model - use whatever paint you like.
2. Texturize your model - with U-Rust paints.
3. Wait a while! AMMO says to wait 20 minutes, but we find it works best if you wait at least 40 minutes (you may have to wait longer depending on the temperature outside!
4. Paint on the Rust Activator. You can do this by brush, or by putting some of the solution in a little spray bottle. Do not spray this through your airbrush!

Amazing Weathering Effects Made Easy

• Easy application for modelers of all levels, beginners and advanced.
• These effects can be applied with a brush directly from the jar or by adding a small amount of water.
• These effects can be applied on any material and surface.

In addition, AMMO has also added two Rust Reactor products to the range. They oxidize the product naturally to create an infinite variety of tones and finishes. This series consists of seven different colours and the two Rust Reactors.