ClearTX V2 VTXFOXWS1240
Foxeer's ClearTX 2 has gained some notable improvements in its version update. This VTX has a higher mW range than before, remote control via BF, and an optimized algorithm for enhanced frequency locking to prevent signal drift.
A solid update, to what was already a solid VTX.
Channel: 48CH including raceband
Remote control: Uart
-Accurate frequency locking
Optimized algorithm effectively enhance frequency locking ability,refuse freqency drift,minimize adjacent channel interference.
Excellent power solution and RF design enable 8 pilots racing simultaneously,no ripple even at full throttle.
Setup VTx through Betaflight by connecting Uart port to FC.
-Drive 500mA Load
Stable 5v power output,[email protected],better adapts to the camera with power requirements,can drive large loads.
You can adjust power to any level after entering Factory Mode.
While powering on or switching channels,power slow ramps up at first 10sec to prevent causing interference.
1 x Foxeer ClearTX 2 5.8G 48CH Remote Control VTx FPV Transmitter International Version
Note: not include the antenna