Menu
Cart 0

Coming in January 2018: New Axial SCX10 II Trail Honcho!

Posted by Dave Henwood on

The 1/10 SCX10 II Trail Honcho is the ultimate adventure rig, taking you to unimaginable extremes with every expedition. Based on the proven SCX10 II platform, the Trail Honcho boasts a tough steel C-channel frame rail chassis, adjustable coil-over oil shocks, an adjustable AX10 transmission, a four-LED set, 1.9" Falken WildPeak M/T tires and 1.9 Method Hole wheels. A water-resistant 35T motor, a waterproof AE-5L ESC and Tactic TTX200 SLT radio system add to the quality – and convenience.

Features

  • High-strength steel C-channel frame rail chassis with cross bracing and hex hardware.
  • 4WD.
  • Water-resistant 35T brushed motor with integrated cooling fan.
  • Waterproof, 3S LiPo-compatible AE-5L ESC with drag brake easily switches between NiMH and LiPo batteries with a single jumper.
  • Tactic™ TTX200 2.4GHz 2-channel SLT™ radio system with TR325 2.4GHz receiver and water-resistant Tactic TSX45 metal-gear servo rated at 151 oz.-in. of torque.
  • Painted and detailed body.
  • Adjustable coil-over oil shocks with threaded bodies and realistic hoops with multiple mounting positions.
  • Adjustable AX10™ transmission with 20T metal drive gear and a final drive ratio of 42.00.
  • WB8 HD Wildboar™ driveshafts with a center-splined slider, a 2x11 mm diameter cross pin and an M4 Screw Shaft (2 mm hex drive).
  • Front/rear AR44 single-piece axles with 8° kingpin angle, molded trusses, integrated C-hubs and lockouts, metal dogbones, helical-cut internal gears and high-quality bearings.
  • Front suspension design virtually eliminates bump steer.
  • 4-link rear suspension reduces axle steer and torque twist.
  • Chassis-mounted servo for improved geometry.
  • Waterproof receiver box.
  • Dual slipper clutch with 32P spur gear for high-torque applications.
  • Adjustable battery tray accommodates batteries up to 3S 5000mAh in capacity and 1.3" x 1.7" x 5.8" (32 x 44 x 147 mm) in size.
  • Scale front tube bumper with aluminum skid plates and two PIAA LED light buckets.
  • Wheelbase can be adjusted from the stock 12.3" (312 mm) length to 11.4" (290 mm) or 12.0" (305 mm) lengths.
  • Two white LEDs in the front and two red rear LEDs.
  • 1.5" (38 mm) wide, 4.7" (119 mm) tall 1.9" Falken WildPeak M/T tires.
  • Licensed 1.02" (26 mm) wide, 2.1" (54 mm) tall 1.9" Method Hole wheels.
  • Simplified wire routing keeps your layout looking clean.

 


Share this post



← Older Post Newer Post →