Your cart is currently empty
Available in store
CloseTRX-4 Chassis Kit
TRX-4 Technology and Innovation-Now Available as a Kit!
The Traxxas TRX-4 Scale and Trail Crawler set the standard for off-road versatility with its radical design and rugged durability. The new TRX-4 chassis kit combines the same innovative features as the RTR vehicle with the fun and excitement of building your own kit. Build your own portal axles, high/low range transmission, and remotely locking differentials. All the parts are organized neatly in labeled bags with waterproof electronics and pre-assembled shocks and suspension links. A fully illustrated color manual makes the kit as much fun to construct as it is to take off-road.
Easy to Follow Assembly Instructions
The TRX-4 Chassis Kit isn't just for expert hobbyists. Traxxas goes the extra mile to make the full-color instruction book easy to follow and fun to use. Each section corresponds to a labeled bag with step-by-step assembly instructions. True-to-scale part illustrations and ruler charts make it easy to differentiate between different screws, bearings, and gears. Helpful assembly tips and clear illustrations take the frustration out of the assembly process. Have fun on the workbench and on the trail with the new TRX-4 Chassis Kit.
WHAT'S INCLUDED IN THE KIT:
WHAT YOU'LL NEED:
The Power of Portals
Build your own game-changing TRX-4 portal axles with the TRX-4 Chassis Kit. These innovative axles lift the chassis at the wheels for huge center pumpkin ground clearance. In order to achieve the same clearance with straight axles (and not get stuck) your tires would need to be over an inch taller than the TRX-4's. Straddling boulders with ease, the TRX-4 chassis takes the path less traveled and leaves everything else behind.
Torque Twist Eliminated
Total axle gear reduction with portals is over twice non-portal designs, virtually eliminating torque twist. Titan 550 motor torque is translated into straight, powerful, forward motion.
Canyon Trail 1.9 Tires
The 1.9 Canyon Trail tires and tuned foam inserts are super-soft and grippy to deliver superior bite on rocky surfaces with convincing scale realism. A 12 mm steel hex drives the wheels.
Aluminum GTS Shocks
All new oil-filled coil-over GTS shocks deliver silky-smooth damping performance and feature threaded shock bodies, an O-ring cap seal, and dual X-ring shaft seals.
Scale Detail
The rugged bumpers provide clearance and protection and are equipped with recovery D-rings. The front bumper is designed to be compatible with many popular off-road accessories.
T-Lock Remote Locking Differentials
Traxxas gives you the freedom and versatility to lock and unlock both of the patented front and rear T-Lock differentials to suit your driving needs, all controlled remotely from your transmitter.
High/Low Range Transmission
When the going gets tough, use your transmitter to shift into low range for incredible 4-wheel drive pulling torque. Shift into high range for blasting down the trail.
Metal Gear Digital Servo
A new full-metal gear digital servo gives you the durability and steering authority you need to confidently and reliably power through tough situations.
Extreme Capability
Steep approach angles front and rear allow the TRX-4 Scale and Trail Crawler to tackle big obstacles head on. The front motor design biases weight forward for superior climbing ability.
Improved Geometry
Portal axles raise the axle link mounts, center driveshaft, steering drag link, and the tie rod up and out of harm's way. Center ground clearance is increased while critical driveshaft and suspension link angles are reduced.
3s Power System
The new XL-5 HV electronic speed control brings 3S LiPo capability and new profiles. A new Trail profile facilitates smooth driving for most of your adventures, while a new Crawl profile introduces hill hold and instant reverse for extremely technical courses. Long run times, up to 2 hours, are possible with a Traxxas 3S 5000mAh iD LiPo battery pack! (Battery not included)
Traxxas Tough
The Traxxas TRX-4 chassis is built to handle the rigors of remote locations and all-day driving fun. The foundation begins with a pair of 1.5 mm thick steel frame rails. Large diameter steel links and heavy-duty, extra-wide rod ends keep the suspension firmly mounted. Hardened steel u-joints are ultra reliable, while the brushless-ready steel portal axle and transfer case gears are smooth and quiet.
Waterproof
The TRX-4 Scale and Trail Crawler is fully waterproof. Only Traxxas' patented innovation gives you the freedom to tackle creeks, snow, and mud without worrying about water in your electronics.
Inner Fenders
Detailed inner fenders integrate with the floor pans and shock towers, keeping rocks, mud, and twigs out of the chassis. The inner fenders are also equipped to install our optional LED rock light kit (sold separately).
Cruise Control
Set your speed using the transmitter and then fine-tune it with the Multi-Function knob to precisely match the pace of your caravan of trail explorers. The TRX-4 is your companion for hours of driving fun and exploration.
Rigid Steel Frame
A heavy-duty formed-steel ladder frame with molded cross members creates an extremely rigid backbone. The elimination of chassis flex allows for precise wheel placement when navigating technical terrain.
Features:
Kit Specs | |
---|---|
Length: | 20.57 inches (523 mm) |
Front Track: | 9.78 inches (249 mm) |
Rear Track: | 9.78 inches (249 mm) |
Ground Clearance: | 3.14 inches (80 mm) |
Weight: | 102.72 ounces (2.91 kg) |
Height: | 10.47 inches (266 mm) |
Wheelbase: | 12.28 inches (312 mm) |
Front Shock Length: | 3.54 inches (90 mm) |
Rear Shock Length: | 3.54 inches (90 mm) |
Approach Angle: | 63.82° |
Departure Angle: | 43.22° |
Breakover Angle: | 59° |
Front Wheels: | 1.9 x 1.02 inches (49 x 26 mm) |
Rear Wheels: | 1.9 x 1.02 inches (49 x 26 mm) |
Front Tires: | 4.64 x 1.89 inches (118 x 48 mm) |
Rear Tires: | 4.64 x 1.89 inches (118 x 48 mm) |
Wheel Hex: | 12 mm |
Speed Control: | XL-5 HV |
Motor (electric): | Titan 21T reverse rotation |
Differential Type: | 4 gear, remote locking |
Transmission: | 2-speed Hi-Lo, remote shifting |
Gear Pitch: | 32 |
Chassis Structure/Material: | Steel ladder frame with Nylon composite cross members |
Brake Type: | Electronic "Hill Hold" |
Drive System: | Shaft-driven 4WD |
Steering: | Chassis mounted 2075X metal gear servo |
Radio System: | TQi 2.4 GHz 4-channel transmitter with #6533 receiver |
Skill Level: | 2 |
Battery Tray: | 158.75 mm L x 47 mm W x 23/26 mm H |
Product carousel items